Archetype Made
·
Product
·
2021 to 2026
Chronos
A premium display case for artisan keycaps, refined over multiple releases and 1,000+ units.
Overview
Project Overview
Chronos is a premium display case for artisan keycaps. I designed it and refined it over multiple releases at Archetype Made, the brand I founded.
I worked solo, from research, CAD, and prototyping through launch, then managed eight manufacturing vendors to produce its parts.
Overview
Problem Statement
Premium keyboards were everywhere, but no one was properly representing artisan keycaps. The display cases on the market were 3D printed or cheap acrylic, and the few made with premium materials like aluminum were gaudy and overdesigned. I wanted to offer something more understated.
Discover
Research & Discovery
Listening First
The first round was shaped by an interest check that drew hundreds of responses. Collectors asked for polycarbonate, and the specific polycarbonate I sourced did a great job blocking UV light, which protects resin keycaps from yellowing over time.
Design
Ideation & Concept
A Low-Profile, Panoramic Case
The first release was machined from aluminum, with the entire top case acting as a magnetic lid for a low-profile, panoramic view. Dampening pads stop the metal-on-metal sound when you close it, and the logo sits on one side only, so you can flip the top for a logo-free display.

First-Release Details
Validate
Prototyping & Testing
The Tilt Problem
Chronos uses magnets in both the top and bottom case, carefully placed so there's some resistance, but the case separates with intent. What I hadn't considered in the first prototype was how people would actually lift the top case off. User testing showed me quickly: most people didn't lift it straight up. They tilted one side to separate it. Because of the tight clearance between the cell walls and the inside faces of the top case, tilting made the two parts collide and lock in place.
To fix it, I tapered the inside walls 4 degrees, starting at about the halfway mark. That let the case open naturally in any direction.
The 4° Taper
Section through the case wall, where the top case lip meets the first cell wall. Switch to compare straight walls with the taper.
Lifting a Corner
One corner lifted, the way people opened it. With straight walls the lip catches the cell wall; with the taper it lifts clear. Geometry and motion come from the CAD.
Validate
Iterations & Refinements
After Launch: Glass That Doesn't Scratch
Polycarbonate had a downside that only showed up with use. It scratches very easily, even from cleaning it with a microfiber cloth, and over time it takes on a lot of swirling. Switching to glass felt like the natural next step. I worked with a glass manufacturer to develop our own proprietary glass that's scratch, fingerprint, and dust resistant, more durable, and blocks UV even better than polycarbonate. It also gave the case an even more premium feel.
The glass sits flush and is user-replaceable, held by a thin adhesive that removes cleanly. It also fit first-release cases, because I didn't want to leave anyone behind.


Our own glass resists scratches, fingerprints and dust. It sits flush, is user-replaceable, and also fits first-release cases.
Design
Design Refinement
Bringing In More Intention: The Atlas Duo
The first two releases were great, but their footprint felt like more of a consequence of the function. The third let me bring more intention to the design. A rounded profile softened the design language and complements the Atlas Duo.
Collectors had been asking for a steeper display angle for years, so the third release introduced the Atlas Duo, one stand that holds the case at 11 or 55 degrees and fits every release, back to the first. I didn't want a second product or a higher price, so both angles had to live in a single stand. Finding the right pivot point took a lot of iteration, since the weight distribution changes with every material configuration.

From Atlas to Atlas Duo
The original Atlas, an add-on for the first and second releases, held the case at 11° only. About 90% of buyers added a stand. The Atlas Duo came with the third release and fits every release back to the first.
One Stand, Two Angles
The Atlas Duo holds the case at 11° or 55°. Tip it over the stand's leg to switch.
A Softer Profile
The case corner, first release and third release, from above and at an angle. The whole footprint softened: all four corners, the window and its border.
Deliver
Final Design
The Current Lineup
The latest release expanded the lineup with new materials, including the first all-brass case. Chronos Lite followed as a more accessible entry point, 3D printed in-house, with a magnetic stand and no screws.
Producing Chronos meant managing eight vendors, one each for the case, glass, screws, Poron pads, rubber feet, microfiber cloths, packaging, and printed instructions.
Across multiple releases, Chronos has sold more than 1,000 units.
At a Glance
40
Keycaps per case
14
Colorways in the latest release
5
Case materials
Ultem top · aluminum base
Heritage

Polycarbonate top · copper base
Asgard

E-coated aluminum
Taupe

Aluminum
Graphite

Polycarbonate top · aluminum base
Specter

Brass
Solar

Dyed polycarbonate top · aluminum base
Atom

Chronos Lite
3D printed in-house in PLA and PETG, borrowing the second release's design language, with a magnetic Atlas at 11°.
Reflect
Lessons Learned
Every major change to Chronos came from watching people use it: how they opened it, how they cleaned it, and how they wanted to display it. The two biggest fixes, the taper and the glass, came from problems I couldn’t see in CAD. They only showed up in real use.






