Archetype Made
·
Product
·
2022 to 2026
Minerva LX
A keyboard where every detail, down to the screws, is designed.
Overview
Project Overview
Minerva LX is Archetype Made's mechanical keyboard. I designed it solo, took it from concept through prototyping, testing, community validation, and launch, and managed nine manufacturing vendors to produce it.
Overview
Problem Statement
The Idea
At the time, smaller 60% keyboards were popular, but I wanted to do something a bit different, so I designed a 60% with a macro column. The design language took a lot of inspiration from Dieter Rams’ work with Braun.

Design
Ideation & Concept
Isolation, Simplified
I wanted to fully isolate the internals from the case. Full isolation usually requires a complex set of flat gaskets, so I designed a simpler and more effective mechanism: silicone sleeves at the mounting points. The board ships with both hard and soft sleeves, so the typing feel can be tuned.
Design
Design Details
The Details, Down to the Screws
The Braun influence lives mostly in the small details. The tapered lip around the keys borrows from one of Rams' alarm clocks. The five accent badges in the back wall take after the buttons on his T523 radio, held by magnets so the accent color can be swapped. Underneath, the pattern carries over to the recessed weight as small round dimples, the same shape as the badges.
The hardest detail was the one you don't see: no screws once the board is assembled. Hiding screws isn't always hard. Hiding them without compromising the design or the function is. Inside a 60%, the plate, the PCB and the clearance every switch housing needs leave very little room, and the standoffs couldn't just go wherever there was space. Each one had to support the board properly, and every connection point changes how the board sounds. They also had to stay hidden behind the bottom case wall when the board is closed, and still keep the board easy to build.


Validate
Prototyping & Testing
Early testing happened privately, with enthusiasts and within the team. The first prototype was close, but a few key things needed work: the sound was dull and flat, the spacebar and typing felt stiff and stale, and plate flex caused collisions inside the case. All of it was fixed through changes to the internal geometry.
I also prototyped POM and polycarbonate plates, but both flexed too much for the design and caused the internals to bottom out too quickly, so they didn't make the final lineup. By the time streamers received boards, most of the kinks were worked out.

Validate
Community Validation
Validating with the Community
Before launch, I ran an interest check that drew 849 responses, with 93% planning to buy. I tested 18 colorways and narrowed them to seven, led by the community's favorites. The written feedback was just as useful: price, size, and the lack of arrow keys were the top reasons people held back.

Deliver
Final Design
The Heritage Call
Heritage was a gut call. I swapped it in at the last minute for Malbec, which had polled higher, because from a design perspective it stood out. At the time, no keyboard used Ultem as a primary material, and it was a conversation starter. Heritage ended up essentially tying Whisp as the top seller, and it later carried over to Chronos. It also inspired other designers in the keyboard industry to work with Ultem.

Deliver
Impact
Outcome
Producing Minerva meant managing nine vendors across the case, PCB, gaskets, feet, screws, anodizing, packaging, and instructions, plus the machined mold for the modular accent badges we made in house.
Minerva LX sold 500 units across seven colorways.
Ultem top · anodized aluminum bottom
Heritage

Clear polycarbonate top · anodized aluminum bottom
Whisp

Clear polycarbonate top · e-coated aluminum bottom
Ghost

E-coated aluminum
Taupe

Polycarbonate
Storm

Polycarbonate top · anodized aluminum bottom
Carbon

Anodized aluminum
Royal

Reflect
Lessons Learned
The interest check was right about a lot, but not everything. Heritage polled below Malbec, then essentially tied for top seller, which taught me to weigh the data against my own read on the design. Some feedback will never fully close: people will always want a different layout, color, or price, and a small-batch board with premium materials and this level of detail carries a real cost.

